Call Us : +91 7065060355 contact@novaformworks.com

Column Formwork
Casts Every Shape Faster
& Reuses 100+ Times

One system for round columns, square columns, rectangular columns, and architectural exposed columns.

      Take a Free Tour to Column Formwork

      Lightweight
      Modular
      Precision-Fit Corners
       100+ Reuses
      Faster Installation
      Easy Handling
       Low Maintenance
      Excellent Concrete Finish
      No Crane Required

      Why Sites Are Moving Beyond Traditional Column Shuttering

      Steel column molds are heavy and need a crane
      for every lift. Plywood column panels swell, leak
      at the joints, and create chaos.

      Nova Column Formwork was built to remove
      these problems at the source – a modular plastic
      panel system with dedicated round and corner
      elements, engineered for repeat use, true-to-
      shape casting, and site-friendly handling.

      It was developed after studying real site
      complaints across hundreds of Indian
      construction projects – from urban high-rises to
      national infrastructure. The result is a system that
      contractors don’t just tolerate, but actively prefer.

      Plywood Joint Leakage

      Heavy Steel Column Moulds

      Crane Dependency

      Poor Column Finish

      See Where It Makes the Biggest Difference

      Residential & Township Projects

      Consistent column sizes across every floor, with panels that adjust to repeat column grids without new inventory. Suitable for: Apartments, villas, gated townships

      Commercial & High-Rise Buildings

      Faster column cycles keep tower schedules on track without added crane dependency. Suitable for: Office towers, retail complexes, mixed-use developments

      Government & Infrastructure Projects

      Built to standards that hold up under inspection - used on metro piers, flyovers, and national infrastructure. Suitable for: Metro corridors, flyovers, government buildings, PSU projects

      Industrial & Factory Structures

      True round and square columns, pour after pour, without custom fabrication. Suitable for: Factory sheds, warehouses, industrial plants

      BUILT FOR REAL SITES

      Designed Around Real Site Challenges

      We don't just make formwork. We solve the real problems you face on site, every single day.

      THE CHALLENGE
      OUR SOLUTION
      Heavy Steel Moulds
      Panels are light enough for two workers to handle by hand. No crane, no heavy machinery.
      Custom Fabrication for Round Columns
      Dedicated round and corner elements fit standard column sizes - no on-site cutting or welding.
      Slow Column Cycles
      Snap-fit modular assembly cuts erection and stripping time significantly compared to bolted steel or nailed plywood.
      High Labour Costs
      Minimal skill needed to assemble. Site labour can be trained on it within a day.
      Frequent Repairs & Replacements
      No rust, no swelling, no warping - the same panel performs pour after pour.
      Poor Column Finish
      Low surface tension stops concrete from sticking, giving a smooth, paint-ready column with no plastering.
      Storage Space Issues
      No special storage facility needed - panels can sit outdoor, indoor, or in basements without damage.
      Material Wastage
      Reusable 100+ times, with a Panel Exchange Program that recovers value even at end-of-life.

      Built to Perform
      Across Every Project Stage

      100+ Reuses Per Panel

      Benefit: One-time investment covers dozens of projects

      Business Impact: Lower cost per square metre than steel, aluminium, or timber over the project lifecycle

      Round & Corner Column Elements

      Benefit: True column shapes without custom fabrication

      Business Impact: Saves fabrication time and cost on every column

      Lightweight Modular Panels

      Benefit: No crane, no heavy crew required for handling

      Business Impact: Lower site logistics cost and faster mobilization

      Smooth, Consistent Finish

      Benefit: No plastering required after de-shuttering

      Business Impact: Direct savings on finishing labour and material across every column

      Everything You Need in One Modular System

      Modular by Design

      One system, every column size and shape - from small residential columns to large infrastructure piers

      Benefit:

      Less inventory, more flexibility.

      Prefixed Tie Rod Holes

      Come with caps built in - ready to use, or seal instantly when idle.

      Benefit:

      No last-minute drilling or misalignment.

      All-Weather, All-Water Performance

      Performs equally well in salt water, fresh water, or freezing conditions.

      Benefit:

      One system for every site condition, anywhere in India.

      100% Recyclable

      Fully recyclable at end-of-life, reducing the project’s carbon footprint.

      Benefit:

      Supports sustainability goals without compromising performance.

      What Your Project Gains

      Nova Plastic Formwork System is engineered to help you save time, reduce cost and deliver better - every single time.

      Area Gain
      Time Faster column cycles - multiple columns cast per day without crane delays
      Labour Up to 30% savings; minimal skilled manpower required
      Quality True round and square shapes, smooth, plaster-free finish
      Safety Built-in safety features, no crane dependency at height
      Cost Lower cost per column over 100+ reuses vs. steel, aluminium, timber
      Maintenance No annual maintenance cost - no rust, no swelling
      Transport Lightweight panels reduce logistics cost
      Reusability 100+ reuses

      Why Builders Keep Choosing Nova

      Real experiences from the sites.
      Real results with Nova Plastic Formwork Systems.
      “At 11,000+ ft altitude, only Nova’s plastic formwork could take the load without warping or failing.”

      - Project Head, Indian Army (Leh Rammed Earth Housing Project)

      Still Replacing Wood After Every Few Uses? It's time to talk!

      contact@novaformworks.com

      Download Catalog
      FAQs

      Let’s Discuss Your Project

      Still have questions?
      Our team is ready and waiting to help.

      Get in touch
      It's a patented, modular plastic formwork system used to cast round, square, and rectangular concrete columns with a smooth finish, faster cycles, and no crane dependency.
      It shapes and supports concrete while it sets, forming structural and architectural columns in residential, commercial, and infrastructure projects.
      Dedicated round and corner elements lock into the same modular panel system, giving a true circular shape without on-site cutting or fabrication.
      Lightweight handling, 100+ reuses, no rust or corrosion, and a smooth finish that skips plastering.
      Yes - panels can be assembled by site labour with minimal training, without cranes or welding.
      The modular panels combine to cover a wide range of column dimensions and shapes, so one system handles most project requirements without extra inventory.

      Steel formwork reduces speed, tires labour, and stretches the day.

      Give us a call @+91 7065060355

      Get in touch

      © 2026 Nova Formworks Private Limited,  All right Reserved