Call Us : +91 7065060355 contact@novaformworks.com

Beam Formwork Casts
Beams in Sync With Your
Slab Cycle

A modular plastic system for beam soffits and sides that
locks directly into the Nova Slab System - no separate props,
no mismatched joints.

      Take a Free Tour to Beam Formwork

      Lightweight
      Modular
      Slab-Compatible
       100+ Reuses
      Faster Installation
      Easy Handling
       Low Maintenance
      Excellent Concrete Finish
      No Crane Required

      The Problem With Conventional Beam Shuttering

      Beam formwork is usually an afterthought – cut from the
      same plywood as the slab deck, propped on its own, and
      stripped on a separate schedule. That mismatch is where
      most beam-to-slab joint problems start.

      Nova Beam Formwork closes that gap. The panels share the
      same locking profile as the Nova Slab System, so beam
      soffits and sides go up and come down as part of one
      coordinated cycle instead of a separate one.

      It’s built for sites where beams run in every direction –
      straight runs, T-beams, L-beams, and inverted beams –
      without needing a different mould for each shape.

      Mismatch at Beam-to-Slab Joint

      Separate Stripping Schedule

      Extra Labour & Handling

      Irregular Soffits & Poor Finish

      Where Nova Beam Formwork Delivers Results

      Residential & Township Projects

      Beam and slab panels installed together, so one crew handles both without switching systems. Suitable for: Apartments, row housing, gated townships

      Commercial & High-Rise Buildings

      Long beam spans across parking levels and podiums, cast without intermediate propping gaps. Suitable for: Podiums, parking structures, office towers

      Government & Infrastructure Projects

      Straight, T-, and inverted beams cast to the same tolerance across an entire project. Suitable for: Government buildings, PSU projects, institutional campuses

      Industrial & Warehouse Structures

      Long-span beams for wide, column-free floors, cast without custom fabrication. Suitable for: Factory sheds, warehouses, logistics parks

      BUILT FOR REAL SITES

      Solving the Everyday Beam-Casting Bottlenecks

      We don't just make formwork. We solve the real problems you face on site, every single day.

      THE CHALLENGE
      OUR SOLUTION
      Mismatched Beam-Slab Joints
      Beam panels share the same locking profile as the slab system, so the two meet without steps or gaps.
      Separate Propping Systems
      One prop and head arrangement supports both the beam soffit and the adjoining slab panels.
      Beam Side Panel Bowing
      Rigid plastic sides hold their line under the weight of wet concrete.
      Slow Beam Stripping
      Side panels release first without disturbing the soffit, so beams can be de-shuttered in stages.
      High Labour Costs
      Minimal skill needed to assemble. Site labour can be trained on it within a day.
      Frequent Repairs & Replacements
      No rust, no swelling, no warping - the same panel performs pour after pour.
      Poor Beam Finish
      Low surface tension gives a smooth, paint-ready beam soffit and sides with no plastering.
      Material Wastage
      Reusable 100+ times, with a Panel Exchange Program that recovers value even at end-of-life.

      What Each
      Feature Delivers on Site

      Slab-Compatible Locking Profile

      Benefit: Beam and slab panels install as one connected system

      Business Impact: Removes the coordination delay between two separate shuttering crews

      Staged Side-Panel Stripping

      Benefit: Sides come off without disturbing the soffit or the slab above

      Business Impact: Frees formwork for reuse earlier in the cycle

      Lightweight Modular Panels

      Benefit: No crane, no heavy crew required for handling

      Business Impact: Lower site logistics cost and faster mobilization

      Smooth Soffit and Side Finish

      Benefit: No plastering required after de-shuttering

      Business Impact: Direct savings on finishing labour across every beam

      A Complete Beam-Casting System

      One Panel Range, Every Beam Profile

      Straight, T-, L-, and inverted beams are all built from the same panel set.

      Benefit:

      Fewer panel types to track on site.

      Prefixed Tie Rod Holes

      Come with caps built in - ready to use, or seal instantly when idle.

      Benefit:

      No last-minute drilling or misalignment.

      All-Weather, All-Water Performance

      Performs equally well in salt water, fresh water, or freezing conditions.

      Benefit:

      One system for every site condition, anywhere in India.

      100% Recyclable

      Fully recyclable at end-of-life, reducing the project’s carbon footprint.

      Benefit:

      Supports sustainability goals without compromising performance.

      The Numbers That Matter to Your Project

      Nova Plastic Formwork System is engineered to help you save time, reduce cost and deliver better - every single time.

      Area Gain
      Time Beam and slab cycles run together instead of on separate schedules
      Labour Up to 30% savings; one crew handles both beam and slab panels
      Quality Smooth soffit and side finish, with a clean beam-to-slab joint
      Safety Staged stripping reduces the load handled at any one time
      Cost Lower cost per running metre over 100+ reuses vs. steel, aluminium, timber
      Maintenance No annual maintenance cost - no rust, no swelling
      Storage No special storage facility required
      Reusability 100+ reuses panel

      What Contractors Say About Nova

      Real experiences from the sites.
      Real results with Nova Plastic Formwork Systems.
      “The surface quality is very good - earlier, with other systems, sealing was difficult and grout kept leaking. With Nova, there's no such problem.”

      - Site Engineer, Ahluwalia Contractors

      Still Replacing Wood After Every Few Uses? It's time to talk!

      contact@novaformworks.com

      Download Catalog
      FAQs

      Let’s Discuss Your Project

      Still have questions?
      Our team is ready and waiting to help.

      Get in touch
      It's a patented, modular plastic formwork system for beam soffits and sides, built to lock into the same panel system as Nova Slab Formwork.
      It's designed to pair with the Nova Slab System, though the panels can also be used as a standalone beam mould where needed.
      Yes - straight, T-, L-, and inverted beams are all built from the same modular panel range.
      Lightweight handling, 100+ reuses, no rust or corrosion, and a beam-slab joint that comes from a shared locking profile.
      Yes - panels can be assembled by site labour with minimal training, without cranes or welding.
      Yes. Side panels release independently of the soffit, so beams can be de-shuttered in stages without disturbing the slab above.

      Steel formwork reduces speed, tires labour, and stretches the day.

      Give us a call @+91 7065060355

      Get in touch

      © 2026 Nova Formworks Private Limited,  All right Reserved