WALL FORMWORK

Wall Formwork Casts
Faster, Reuses 100+ times

One system for Shear Wall, L-Shape wall, load-bearing walls, non-load-
bearing walls, retaining walls, and partition walls.

Take a Free Tour to Wall Formwork

Lightweight

Modular

Waterproof

100+ Reuses

Faster Installation

Easy Handling

Low Maintenance

Excellent Concrete Finish

No Crane Required

Why Sites Are Moving Beyond Traditional Formwork

Plywood swells. Steel rusts and needs a crane.

Nova Wall Formwork was built to remove these problems at the source – a modular plastic panel system engineered for repeat use, clean finishes, and site-friendly handling.

It was developed after studying real site complaints across hundreds of Indian construction projects – from urban high-rises to high-altitude army housing. The result is a system that contractors don’t just tolerate, but actively prefer.

Plywood Joint Leakage

Heavy Steel Wall Panels

Crane Dependency

High Labour

See Where It Makes the Biggest Difference

Residential & Township Projects

Consistent finish across every unit, with panels that adjust to repeat floor plans without new inventory. Suitable for: Apartments, villas, gated townships

Commercial & High-Rise Buildings

Faster wall cycles keep tower schedules on track without added crane dependency. Suitable for: Office towers, retail complexes, mixed-use developments

Government & Infrastructure Projects

Built to standards that hold up under inspection - used on metro stations, airports, and national infrastructure. Suitable for: Metro corridors, airports, government housing, PSU projects

Water-Retaining & Basement Structures

Zero corrosion and leak-proof joints make it a natural fit for water contact areas. Suitable for: Water tanks, STPs, WTPs, basements

THE CHALLENGE

OUR SOLUTION

Heavy Lifting

Panels are light enough for two workers to handle by hand. No crane, no heavy machinery.

Slow Floor & Wall Cycles

Snap-fit modular assembly cuts erection and stripping time significantly compared to bolted steel or nailed plywood.

High Labour Costs

Minimal skill needed to assemble. Site labour can be trained on it within a day.

Frequent Repairs & Replacements

No rust, no swelling, no warping — the same panel performs pour after pour.

Water-Damaged Shuttering

Plastic panels are unaffected by water, humidity, or basement conditions.

Poor Concrete Finish

Low surface tension stops concrete from sticking, giving a smooth, paint-ready wall with no plastering.

Storage Space Issues

No special storage facility needed — panels can sit outdoor, indoor, or in basements without damage.

Material Wastage

Reusable 100+ times, with a Panel Exchange Program that recovers value even at end-of-life.

Built to Perform
Across Every Project Stage

100+ Reuses Per Panel

Benefit: One-time investment covers dozens of projects

Business Impact: Lower cost per square metre than steel, aluminium, or timber over the project lifecycle

Lightweight Modular Panels

Benefit: No crane, no heavy crew required for handling

Business Impact: Lower site logistics cost and faster mobilization

Smooth, Consistent Finish

Benefit: No plastering required after de-shuttering

Business Impact: Direct savings on finishing labour and material across every wall

Panel Exchange Program

Benefit: Trade in used panels for new ones at a fixed ratio

Business Impact: Recovers residual value that steel and aluminium scrap rarely match

Everything You Need in One Modular System

Modular by Design

One system, every wall size - from small villas to mega infrastructure.

Benefit:

Less inventory, more flexibility.

Prefixed Tie Rod Holes

Come with caps built in - ready to use, or seal instantly when idle.

Benefit:

No last-minute drilling or misalignment.

All-Weather, All-Water Performance

Performs equally well in salt water, fresh water, or freezing conditions.

Benefit:

One system for every site condition, anywhere in India.

100% Recyclable

Fully recyclable at end-of-life, reducing the project’s carbon footprint.

Benefit:

Supports sustainability goals without compromising performance.

What Your Project Gains

Nova Plastic Formwork System is engineered to help you save time, reduce cost and deliver better - every single time.

Area	Gain
Time	Faster wall cycles - up to 3× casting height per pour vs. steel
Labour	Up to 30% savings; minimal skilled manpower required
Quality	Smooth, consistent, plaster-free finish on every wall
Safety	Built-in safety features, no crane dependency at height
Cost	Lower cost per m² over 100+ reuses vs. steel, aluminium, timber
Maintenance	No annual maintenance cost - no rust, no swelling
Storage	No special storage facility required
Reusability	100+ reuses per panel, with Panel Exchange for old stock

“The surface quality is very good — earlier, with other systems, sealing was difficult and grout kept leaking. With Nova, there’s no such problem.”

- Site Engineer, Ahluwalia Contractors

Still Replacing Wood After Every Few Uses? It's time to talk!

contact@novaformworks.com

Download Catalog

FAQs

Let’s Discuss Your Project

Still have questions?
Our team is ready and waiting to help.

Get in touch

It’s a patented, modular plastic formwork system used to cast concrete walls with a smooth finish, faster cycles, and no crane dependency.

It shapes and supports concrete while it sets, forming walls in residential, commercial, and infrastructure projects.

Panels lock together using a patented snap-fit system, hold concrete during the pour, then strip cleanly for reuse.

Lightweight handling, 100+ reuses, no rust or corrosion, and a smooth finish that skips plastering.

Yes - panels can be assembled by site labour with minimal training, without cranes or welding.

Steel formwork reduces speed, tires labour, and stretches the day.

Give us a call @+91 7065060355

Get in touch

Wall Formwork Casts
Faster, Reuses 100+ times

Take a Free Tour to Wall Formwork